Gear is how to process? Gear processing technology requirements

In the rapidly changing gear processing category, it is particularly important to select efficient and accurate processing methods and gear cutting tools. Parts, production process and batch size all determine the selection of tools and gear processing methods.

2023-08-26

2023

08-26

Cleaning Process and Key Points of Gear Shaft

There are many manufacturers who make shafts, and the structure of shaft parts is relatively simple. General drive shafts can be cleaned by high temperature and high pressure cleaning; for gear shaft parts, you can also clean the tooth surface. Method, metal parts should use oil cleaning agent as the cleaning medium.

2023-08-26

2023

08-26

Electromagnetic brake how to judge good or bad, electromagnetic brake fault analysis

Electromagnetic brake is a commonly used adjusting element in mechanical transmission system, which is widely used in all kinds of lifting, conveying, metallurgy, mining and other mechanical equipment. However, the electromagnetic brake is prone to failure during long-term use. This article will be from how to judge the quality of electromagnetic brake and troubleshooting electromagnetic brake fault two aspects of the specific introduction.

2023-08-26

2023

08-26

Electromagnetic brake maintenance and maintenance explained in detail

The electromagnetic clutch brake combination is referred to as the electromagnetic clutch brake combination, and has the following advantages:

2023-08-26

2023

08-26

How should synchronous belt wheel maintenance maintenance

As we all know, the machines we use need regular maintenance on a daily basis. The same is true for synchronous pulleys. Synchronous belt wheel as a transmission equipment, its transmission effect is also very good. With the continuous improvement of the current technical level, the application of synchronous belt wheel can also achieve the effect of energy saving, so its promotion value is still very good.

2023-08-26

2023

08-26

Introduction to the advantages and application of synchronous belt wheel

Although the timing belt wheel is only a small part, it plays an important role in the transportation of the timing belt and provides support for the efficient transportation of the timing belt. So what are the advantages and applications of synchronous belt wheels?

2023-08-26

2023

08-26

The working principle of electromagnetic brake

The working principle of the electromagnetic brake is to use the electromagnetic force of the electromagnet to compress the moving part of the brake disc and the machine bearing, so as to achieve the purpose of braking. When the electromagnet is energized, an induced electric field is generated in the conductor coil. The charge in the conductor coil moves, and the movement of the charge generates a magnetic field. The intensity of the magnetic field is proportional to the current in the wire. As the current gradually increases, the magnetic field of the electromagnet also increases, the magnetic force and the brake disc act to produce a braking effect.

2023-08-26

2023

08-26

What are the types of couplings?

Coupling refers to a device that connects two shafts or shafts and rotating parts to rotate together in the process of transmitting motion and power, and does not disengage under normal circumstances. Sometimes it is also used as a safety device to prevent the connected parts from bearing excessive load and play the role of overload protection. The coupling is an interface for high-precision connection between the shaft and the shaft.

2023-08-26

2023

08-26